Grass Valley PVS 3000 July 2004 - Manual (Page 37)

Select audio I/O format
23 February 2004 PVS3000 & PVS 3500 Installation Guide 37
Select audio output format
To select audio output format:
1. Click Next to navigate to Page 2 of the Audio Output Routing dialog box as shown.
2. For AES/EBU or Analog audio, no selection is required. These audio formats are
selected automatically when the system sees the audio interface is attached.
3. Select embedded audio output using the following steps:
a. For embedded audio, select the Embedded check box for each audio channel pair
that require embedded audio.
b. Click the left-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select a video output as shown.
NOTE: With one audio board, only the first 4 video outputs are selectable.