Grass Valley PVS 3000 July 2004 - Manual (Page 40)

Test your system setup using VdrPanel
40 PVS 3000 & PVS3500 Installation Guide 23 February 2004
3. Load and play a clip on each Play Channel as follows:
a. Click anywhere in the panel for a Play Channel.
b. Select VideoClip | Load Clip to open the Load Clip dialog box.
c. Select clip #1 in the clip list, then click OK to load the clip.
d. Click Play and verify that video, audio are present at the channel outputs. If you
have a problem, refer to the Chapter 10, “Solving Common Setup Problems” in
the Profile XP System Guide.
4. Use steps 2 and 3 to test all record and play channels.
5. Continue with the next procedure in this guide to adjust video timing.