Grass Valley NV9604 v.1.1 - Manual (Page 14)

6
Introduction
Other NV9604 Functions
Takes are all-level.
Operators can use a ‘Source Shift’ button to toggle between two sets of sources.
Under NV9602 Control
The NV9604 can be used only for salvo buttons when it is under control of a NV9602 configured
in multi-destination mode.
Secondary Modes
The NV9604 of itself has no secondary modes.
The NV9604 has a limited self-test capability, but no setup mode in which to change its panel ID.
To change the panel ID, you must use NV9000-SE Utilities. See
Self-Test on page 28.
Other NV9604 Functions
The NV9604 can be configured to perform the following additional functions:
• Previous source.
• System salvos.