Grass Valley NV9604 v.1.1 - Manual (Page 13)

5
NV9604
User’s Guide
Single-Destination Mode
In single destination mode, the panel’s destination is the configured default destination and
there are no destination buttons. Takes are performed on all levels.
When the panel is an NV9602 extension, operators can use a ‘Source Shift’ button on the
NV9602 to toggle between two sets of sources.
Takes occur as soon as a source button is pressed.
Under NV9602 Control
The single destination is the one configured for the NV9602. The default destination for the
NV9604 is ignored.
Single-Destination Mode with Breakaway
This mode is an extension of single-destination mode that includes level buttons on the NV9602
panel. This mode is not available when the NV9604 is stand-alone.
Here too, the single destination is configured as the default destination for the NV9602. The
default destination for the NV9604 is ignored. There are no destination buttons.
The NV9602’s level buttons selected the levels on which the take is to occur. Takes occur on all
levels when either no levels are selected or when all levels are selected.
Operators can use a ‘Source Shift’ button to toggle between two sets of sources.
Levels selected on the NV9602 affect sources selected on either the NV9602 or NV9604.
Limited X-Y Mode
In limited X-Y mode, takes occur from a single source to a single destination. Destinations are
selectable.
Takes are all level. Pressing a source button completes the take.
When the panel is an NV9602 extension, operators can use a ‘Source Shift’ button to toggle
between two sets of sources. Similarly, operators can use a ‘Destination Shift’ button to toggle
between two sets of destinations.
Under NV9602 Control
Both sources and destinations can be selected on the NV9604. The ‘Source Shift’ button and the
‘Destination Shift’ button of the NV9602 affect source and destination selections on the NV9604.
Multi-Destination Mode
This mode is not available when the NV9604 is stand-alone. In this mode, source buttons of the
NV9602 are configured with destinations as well as sources.
Each NV9602 source button completes a route to an individual destination. If each button had a
different destination, it would be possible to route to 38 destinations. The typical NV9602
configuration would have fewer destinations.
The NV9604’s source buttons do not support multi-destination operations. The only button
functions available in this mode are salvo buttons.