Grass Valley NV9605 v.1.1 - Manual (Page 63)

53
NV9605
User’s Guide
Environmental Specifications
NV9605 Environmental Specifications
Defaults
Initial Panel State
Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.
Configuration Page
The initial NV9605 configuration has no buttons defined. The default panel options are:
Behavioral model: Limited X-Y.
Release mode: Normal.
Default destination: None.
Status monitor: None.
Data routing mode: Automatic.
Default name set: System names.
All other options: Disabled (check boxes clear).
DHCP
The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a fixed
IP address using the Panel IP Configuration Utility.
Drawings
The drawings on the following page provide overall and critical dimensions.
Specification Detail
Operating temperature 0–30 °C, ambient.
Relative humidity 0 to 90%, non-condensing.
Cooling No fan required.