Configuration, Summary, Adding a panel to an nv9000 configuration – Grass Valley NV9605 v.1.1 User Manual
Page 21: 4 configuration, Summary adding a panel to an nv9000 configuration, Chapter 4, Topics

11
Configuration
Chapter 4 provides configuration instructions for the NV9605.
Topics
Adding a Panel to an NV9000 Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NV9605 Panel Configuration Page
Multi-Destination Configuration
Single-Destination Configuration
This chapter addresses configurers. Operators and other persons not interested in NV9605
configuration need not read this chapter.
Summary
The NV9605 is a relatively simple panel. It has 36 function buttons, 2 scroll buttons, and a small
display. It has 2 operating modes.
•
•
The set of button functions varies slightly between modes.
NV9000-SE Utilities is the software with which to configure the NV9605. Figure 4-1, following,
shows the default NV9605 panel configuration page from NV9000-SE Utilities.
Adding a Panel to an NV9000 Configuration
You must create configurations for the NV9605 using NV9000-SE Utilities. We assume that you
are familiar enough with NV9000-SE Utilities that you can understand the following material. It
is not difficult material, but some of the concepts might not be familiar to everyone.
It takes only a few seconds to add a new panel configuration.