Grass Valley NewsQ Pro v.2.1 - Manual (Page 118)

Appendix Installing and Configuring NewsQ Pro
104 Digital News Production
Defining X-keys
You can use NewsQ Pro with the X-keys Jog/Shuttle controller. For installation
information, see “Installing the X-keys Jog/Shuttle Controller” on page 88.
Many of the X-keys have been pre-configured on the Green layer; only the
Toggle key has been pre-configured on the Red layer. You can change the
default layout or add new commands on the unused keys. To customize the
keys, use the procedure below.
Before you can use the X-keys Jog/Shuttle controller, you need to
install the X-keys Macro Works software. However, do not use the X-
keys Macro Maker application to modify the keys.
To configure or modify a key, follow these steps:
1. In the NewsQ Pro Tools menu, select Options .
2. Select the X-keys tab.
3. Click on the key that you want to configure or modify. A drop-down list
displays the available commands.