Grass Valley NewsQ Pro v.2.1 - Manual (Page 109)

Configuring GPI Inputs
Digital News Production 95
To reassign the function of a GPI input, select the GPI number, the channel it
affects, and the function you want the GPI to perform.
Setting Options Description
Enable 32-Port GPI
Interface On (checked)
Off (unchecked)
Check Enable 32-Port GPI Interface to control the NewsQ
Pro software via GPI input.
GPI Input 1 through 16 or 32 Select the GPI input you are configuring.
Channel
Channel A-F
Not Channel Specific Select the GPI input channel.
GPI Function for
Channel A-F labels:
First
Second
Third
Select a function for each GPI input. Each input usually has only one function, though
it can perform up to three functions.
The GPI has no assigned function.
Play/Stop Plays or stops the current clip.
Recue Recues the current clip.
Cue Previous Cues the previous clip in the playlist.
Cue Next Cues the next clip in the playlist.
On-Air Only used with the First GPI function. Sends the specified
channel an On-Air signal. When NewsQ Pro detects a
signal, the channel window becomes red to indicate the
channel is playing to air. When the API trigger is held longer
than the Minimum On-Air duration specified under Options
and then released, the channel goes into post-roll and then
cues the next clip.
GPI Function for
Not Channel
Specific
:
The GPI has no assigned function.
Cue All Cues a clip into each available channel, starting with the
selected clip.
Play Next Plays the next clip in the playlist.
Stop All Stops all playing channels in the playlist.
Cursor Up Selects the previous item in the playlist.
Cursor Down Selects the next item in the playlist.