Configuring gpio settings – Grass Valley NewsQ v.5.5 User Manual
Page 85
Digital News Production
83
Configuring GPIO Settings
General Purpose Interface (GPIO) inputs allow you to connect a switcher or
other control device to the NewsQ system and use it as an input device to
control the NewsQ software application.
For example, you set GPI01 to
Cue Selected
as the first function and
Play
as
the second function. When you activate GPI trigger 1 on the controller, the
selected clip will cue up and then play.
To reassign the function of any of the GPI inputs, select the GPI trigger number
and the function you want the GPI to perform.
Setting
Options
Description
Enable Triggers
On
Off
Check this option if you want to use GPI inputs to
control the NewsQ software.
Trigger
Single-channel system:
GPI01 - GPI06
Dual-channel system:
GPI01 - GPI03
for Channel 1
GPI01 - GPI03
for Channel 2
Select the number of the GPI trigger you are
configuring.