Grass Valley Media Conversion - Manual (Page 106)

DVE Editor Media Conversion Software
Page 106 Miranda Technologies Ltd
DVE Modes
Imagestores can be operated in several different modes which affect how the
video is routed through the system. An appropriate mode must be selected in
order for the DVE to be visible on the output. The modes can either be set
from the editor or from the Imagestore’s front panel. For details of using the
front panel, please refer to your Imagestore manual. To set the mode from the
editor, press the DVE Mode button. This will bring up the mode options that
are appropriate to the Imagestore model you have connected to.
Imagestore 2 / 300 DVE Modes
In order for the DVE to operate, the Imagestore has to be in Cascade mode
and not the Swap-Preview mode. You can check what mode it is in by using
the front panel and going to ‘Setup -> System Setup -> Cascade/Swap-Pvw’.
It should display ‘Cascade’. If it is not in Cascade mode, the DVE options
will not operate or appear on the front panel menu.
DVE Bypass
The DVE is not enabled and no delays are added to either video or audio.
DVE None
Although the DVE is not enabled, both video and audio are delayed by one
frame.