Grass Valley M-Series iVDR Upgrade Kit Installation - Manual (Page 37)

6 July 2004 M-Series Upgrade Kit Manual 37
Replace components in reverse order
Replace components in reverse order
Replace the following components:
• Fan Module
• Front Panel or Media Drive door
Make a new media file system
In this procedure you will use the iVDR Storage Utility to make a new media file
system to make use of the new drives you’ve added.
1. Reconnect the power cord and power-on the iVDR using the front standby switch.
The iVDR boots in Storage Maintenance mode, and the Storage Utility starts
automatically.
2. Select the Storage Utility context menu button and select Make Media File
System .
3. Select Yes to confirm making the file system.
A progress indicator appears. When the process is complete, a message appears to
confirm success and to prompt you to reboot.
4. Select Yes to reboot.
5. Click No to reboot in normal mode.
The iVDR reboots in normal mode, and AppCenter starts automatically.
6. Verify access to the file system as follows:
a. In the AppCenter Clips pane, select the Current Bin label , then
select the Organize Bins .