Grass Valley M-Series iVDR Upgrade Kit Installation - Manual (Page 23)

6 July 2004 M-Series Upgrade Kit Manual 23
Replace the top cover
Replace the top cover
Connect cabling and apply label
1. Apply the rear panel 1394 label provided with the upgrade kit.
2. Connect the M-Series iVDR power cord.
3. Connect your IEEE 1394 device (cable not provided).
3 Replace
top
screw
2 Replace
rear screw
1 Replace top cover,
then push forward
to lock
R2 CH1
P2 CH2
OUT
IN
P2 LTC P2 CH1
R2 CH2 R2 LTC
Analog
Audio
Pu sh Pu sh
Cmpst
REF
L R Loop Thru
GPIO Audio MON Out !
PORT 3
PORT 4
RS422
PORT 1
PORT 2
RS422
SCSI VGA
FRONT
PANEL
1394A Input
Apply label 1394
Note:
The iVDR supports
one IEEE 1394 input.