Grass Valley KayakDD-1 Installation - Manual (Page 87)

KayakDD-1 Digital Production Switcher
Name Command Code Remark
TRANSITION USHBUTTON
SELECT COMMAND
FB
Supported are:
Program Bus Crosspoint 0-9 / 00H - 09H
AUTO TANS / 0BH
DSK MIX / 0CH
DSK CUT / 0DH
WIPE / 0EH
MIX / 0FH
Preset Bus Crosspoint 0-9 / 10H -19H
REVERSE WIPE / 1DH
FADE TO BLACK / 1FH
Key Bus Crosspoint 0-9 / 20H -29H
GVG100 Wipe Pattern / 30H -39H
BKGD / 48H
KEY / 49H
CUT / 4AH
KEY CUT / 52H
NOTE!
Every ME related command effects the DD35/XtenDD/Kayak "PP" ME stage on default. To effect another ME use the "Editor ME Mapping"
feature. The GVG „DSK“ will always translated to Key3 in the "PP mapped" ME stage.
TIMING!
The standard GVG-200 (not GVG-100!) protocol timing will be used: Commands will be executed in the third field after response.
If there are timing problems, fix them by changing the timing parameters of the editor.
86 Planning and Installation Manual