Epson LVP-X200A - Manual (Page 18)

18
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Brightness adjustment
1. Press the MENU button.
2. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
PICTURE.
3. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control).
4. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
BRIGHTNESS.
5. Press the
ª or º buttons on the control panel (or
{ or } buttons on the remote control) to adjust
brightness.
If you wish to change the color balance, follow
the steps below.
6. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
USER and press the ENTER button.
AUDIO PC CARD
AUTO PLAY
PinP/
EXPAND
PICTURE SIGNAL
AUDIO PC CARD
AUTO PLAY
PinP/
EXPAND
PICTURE SIGNAL
CONTRAST BRIGHTNESS TINT COLOR
GAMMA
CORRECTION
0 0 0 0
USER USER USER
OPTION INSTALLATION AUDIO PC CARD
AUTO PLAY
PinP/
EXPAND
SIGNAL PICTURE
CONTRAST BRIGHTNESS TINT COLOR
GAMMA
CORRECTION
0 0 0 0
USER USER USER
OPTION INSTALLATION AUDIO PC CARD
AUTO PLAY
PinP/
EXPAND
SIGNAL PICTURE
CONTRAST BRIGHTNESS TINT COLOR
GAMMA
CORRECTION
0 15 0 0
USER USER USER
OPTION INSTALLATION AUDIO PC CARD
AUTO PLAY
PinP/
EXPAND
SIGNAL PICTURE
15 15 15
B
BRIGHTNESS
G R
7. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select the
desired color R, G or B.
8. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to adjust
brightness of the desired color.
9. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, simultaneously
press the MENU and POWER button.
• To switch back to the factory preset of each menu,
select RESET and press the ENTER button.
• When selecting RESET, the buttons cannot be oper-
ated for 2 to 18 seconds.
15 15 15
B
BRIGHTNESS
G R
15 -15 15
B
BRIGHTNESS
G R
Menu operation