Grass Valley KMV-3901 Installation v.7.70 - Manual (Page 32)

26
Specifications
Mosaic Outputs
Mosaic Outputs
Jitter < 0.3 UI
Cable length 100 m (328 ft) (Belden 1694A)
Note: If you wish to use the HD-SDI monitoring outputs (see
page 26 ) and configure them for a 1080p format, then the
multiviewer supports a maximum cable length of 85 m (279 feet) at
the video inputs. Refer to “Configuring the HD-SDI Monitoring Output
Format” in the “Setting Up Rooms” chapter of the Kaleido-X User's
Manual, for more information.
Graphic converted to HD-SDI from KXI-DVI-Bridge
Signal SMPTE 292M-C (1.485, 1.485/1.001 Gbps)
Formats 1024 × 768 @ 60 (XGA)
1280 × 1024 @ 60 (SXGA)
1366 × 768 or 1368 × 768 @ 60 (WXGA)
1680 × 1050 @ 60 (WSXGA+)
1600 × 1200 @ 60 (UXGA)
Cable length 100 m (328 ft) (Belden 1694A)
3G-SDI (continued)
HDMI outputs (2)
Signal HDMI V1.3
Format 1280 × 1024 up to 1920 × 1200p configurable (all progressive scan)
Supported refresh rates: 50 Hz and 59.94 Hz
Refer to the table on
page 16 for a list of supported formats.
Cable length 15 feet
Connector HDMI type connector
Signal path 8 bits output
HD-SDI monitoring outputs (2)
Signal 4:2:2 SMPTE 292M-C (1.5 Gbps), SMPTE 424M
Formats 720p50, 720p59.94
1080i50, 1080i59.94
1080p50 (level A only), 1080p59.94 (level A only)
Note: If you configure an HD-SDI monitoring output for a 1080p
format (see page 6 ), then the multiviewer supports a maximum cable
length of 85 m (279 feet) at the video inputs. Refer to “Configuring the
HD-SDI Monitoring Output Format” in the “Setting Up Rooms”
chapter of the Kaleido-X User's Manual, for more information.