Grass Valley KMV-3901 Installation v.7.70 - Manual (Page 20)

14
Operation
KMV-3901/3911 Service Control Panel in iControl
The status icon area shows a series of twelve icons that report the status of some card
parameters.
Move the mouse over an icon and a status message appears below the icon area providing
additional information.
Error status messages appear in the message area without mouse-over.
• If there are multiple errors, the error messages cycle so all can be seen.
• The icon whose status or error message is shown is highlighted with a mauve
background.
The navigation area contains buttons that control the contents of the main area. Click a
button to access the associated features. Click the left side border (identified by a small
arrow icon) to hide or reveal this area.
The operating control area contains the main operating controls for managing the KMV-
3901/3911 multiviewer’s feature set. The contents change depending on the button you
clicked in the navigation area. The five panels are described individually in the following
sections:
• Layout Controls Panel below
• Output Settings Panel , on page 15
• Network Settings Panel , on page 16
• Alarm Configuration Panel , on page 17
Icon 1 - Control status Icon 2 - Reference
status
Icons 3 to 10 - Status
of inputs 1 to 8 Icons 11 and 12 - Status
of outputs 1 and 2
Green: Remote
control via
iControl Green: Locked to
frame reference
(mouse over to
see format) Green: Input
signal detected
(mouse over to
see details of the
format) Green: EDID
information
detected on the
HDMI channel
Yellow: Local
control at the
Densité frame
using the menu Red: Unavailable Red: No input
signal detected Red: No EDID
information
detected on the
HDMI channel
Message area