Grass Valley KMV-3901 Installation v.7.70 - Manual (Page 22)

16
Operation
Network Settings Panel
The following table lists some (but not all) output formats supported at the HDMI
connections. You can customize your own timing rates for resolutions ranging from 1280 ×
1024 pixels up to 1920 × 1200 pixels (all progressive scan), by using XEdit.
Network Settings Panel
The KMV-3901/3911 is shipped with default network settings, which will not work for your
network and must be changed. You may need to consult your network administrator to get
the correct values. Enter the appropriate IP address, mask and gateway information to
configure this KMV-3901/3911 within your Ethernet network.
Resolution Format name Refresh rates (Hz)
1280 × 1024 SXGA 50.00, 59.94
1280 × 1024 BARCO 59.94
1360 × 768 NEC 50.00, 59.94
1480 × 1200 Christie 50.00, 59.94
1600 × 1200 UXGA 50.00, 59.94
1920 × 1080 Baycat 50.00, 59.94
1920 × 1200 WUXGA 50.00, 59.94
Note: All KMV-3901/3911 cards within a housing frame must have their
output heads configured with the same refresh rate. If your frame is
referenced, then the heads’ refresh rate must also match the reference
signal's refresh rate.