Grass Valley KMV-3901 Installation v.7.70 - Manual (Page 15)

9
Operation
The KMV-3901/3911 can be controlled in different ways:
• On the Densité frame, the local control panel and its buttons can be used to navigate
menus and adjust parameter values (see Using the Densité Frame Control Panel , on
page 11).
• Grass Valley’s iControl system can be used to access the card’s operating parameters
from a remote computer, using a convenient graphical user interface (see Remote
Control Using iControl , on page 13).
• The loading and management of layouts is handled via a Java-based application, XEdit,
accessed through a dedicated Ethernet port (see the Kaleido-X User’s Manual,
(available on the Kaleido-X DVD that shipped with your system, and from the Grass
Valley support portal).
• A GPI interface allows remote layout selection.
• The output resolution of the card can be controlled automatically through the EDID
interface with the display.
• The RCP-200 advanced remote control panel, and the Kaleido-RCP2 control panel allow
you to perform operations on the monitor wall, either by themselves or in association
with an external keyboard and a mouse. Refer to the RCP-200, Kaleido-RCP2, and
Kaleido-X documentation (available on the Kaleido-X DVD that shipped with your
system).
Card-Edge LEDs
Select button
Status LED
SDI LEDs
2
1
3
4
5
6
7
8
CPU Status LED
Power LED
Boot LED