Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 57)

Restoring the network adapter order
To restore the network adapter order to its pre-DLC configuration, the Loopback adapter needs
to be the first adapter on the K2 Summit system.
1. On the Windows desktop right-click My Network Places and select Properties .
The Network Connections window opens.
2. On the menu bar at the top of the window, select Advanced , then Advanced
Settings …
3. On the Adapters and Bindings tab, order adapters as follows:
a) Loopback adapter
b) Control network
c) Media network
4. To close Advanced Settings and accept the changes, click OK .
5. Close the Network Properties window.
6. Proceed to Undoing the DLC server configuration.
Related Links
Restoring the K2 Summit system to a pre-DLC configuration on page 56
Undoing the DLC server configuration
Prerequisites:
• The network adapters need to be ordered as described in Ordering the network
adapters for K2 Dyno PA.
To undo the the DLC server configuration, follow these steps:
1. From the Start menu, select Programs | Stornext File System | Client Configuration .
The SNFS configuration client opens.
2. Click the Properties button.
The Properties dialog box displays.
3. On the Distributed LAN tab, select Disable .
4. Turn write filter on.
5. Reboot the machine.
Related Links
15October 2010 K2 Dyno Production Assistant Configuration Manual version 1.5 57
Managing K2 Dyno PA