Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 20)

Notes Version Software
Only needed if
using the Browse 1.5.0.1590 DLC Tool
feature on a
standalone K2
Summit system.
In addition, the K2 Summit Production Client/K2 Solo Media Server must have the
following:
Notes Component
If K2 Summit 7.2x software was installed on this system, it
already has a unique file system name and storage disk labels. If A unique file system
name and storage disk
labels (standalone only).
upgrading to K2 Summit 7.2x software from a previous version,
refer to Creating a unique file system name and storage disk
labels in the K2 Dyno PA Configuration Manual.
For more information, refer to Ordering the network adapters
for K2 Dyno PA in the K2 Dyno PA Configuration Manual. Dyno PA-specific
network adapter order.
K2 Dyno Replay Controller
The K2 Dyno Replay Controller has the following software requirement:
Notes Version Software
If using a K2 Dyno
Replay Controller 1.6.0.119 or higher
For information on the K2 Dyno
Replay Contoller software, consult the
K2 Dyno Replay
Controller
with the K2 Dyno
PA system.
K2 Dyno Replay Contoller
documentation.
Related Links
Hardware requirements on page 18
System requirements on page 18
20 K2 Dyno Production Assistant Configuration Manual version 1.5 15October 2010
K2 Dyno PA prerequisites