Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 22)

About configuring K2 Summit SAN systems
To use the Browse feature on a K2 Dyno PA machine, the K2 Summit SAN system
needs the following:
• The K2 Summit system network adapters configured for Dyno PA, as described
in Ordering the network adapters for K2 Dyno PA.
• The FsNameServers file in the SNFS directory configured for Dyno PA.
Related Links
Configuring the K2 Summit SAN and K2 Dyno PA on page 21
About the FsNameServers file on page 35
Ordering the network adapters for K2 Dyno PA on page 36
About the FsNameServers file
To use the Browse feature of K2 Dyno PA, the FsNameServers file needs to be
configured on each K2 Summit and Dyno PA machines in the system. The
FsNameServers file contains the Control network port IP addresses for each host name
server in the system (up to a total of three host name servers).
For example, if you have the following:
IP address for the Control network port
on the machine Machine
10.0.0.1 K2 Summit SAN #1 (Host name server)
10.0.0.2 K2 Summit SAN #2 (Host name server)
10.0.0.3 K2 Summit SAN #3
10.0.0.4 K2 Summit Standalone
10.0.0.5 K2 Summit Standalone
10.0.0.101 K2 Dyno PA #1
10.0.0.102 K2 Dyno PA #2
In this example, the FsNameServers file would look like this:
22 K2 Dyno Production Assistant Configuration Manual version 1.5 15October 2010
Configuring the K2 Summit SAN and K2 Dyno PA