Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 32)

3. In the Add/Edit Server Device dialog box, check the Enabled box.
4. Click the SNFS Configuration button.
5. Enter the file system name.
If using a standalone K2 system, the file system name must be unique to this
K2 Summit system, for example gvfs_summit1. The name is case sensitive.
NOTE: The file system name can be found in the Windows Explorer tree
view, next to the V: drive.
6. Assign a drive letter.
7. If using a standalone K2 system, specify the maximum number of clients. This is
the number of Dyno PA clients that can access assets on a K2 Summit system at
the same time. The maximum number allowed is 2.
8. Click the Apply Setting button.
Depending on your workflow, proceed to Adding a bin or Adding a repository.
Related Links
Configuring the K2 Summit SAN and K2 Dyno PA on page 21
Configuring the standalone K2 Summit system and K2 Dyno PA on page 33
About standalone K2 Summit system and K2 Dyno PA DLC configuration on page 34
32 K2 Dyno Production Assistant Configuration Manual version 1.5 15October 2010
Configuring the K2 Summit SAN and K2 Dyno PA