Grass Valley K2 Dyno PA v.2.0 - Manual (Page 53)

4. To move an existing rule to the bin, right-click on the rule, select Send to Bin
and choose the rule bin.
•
• To create a new rule in the rule bin, right-click on the rule bin and select New
rule .
• To remove a rule from the bin, right-click on the rule and select Remove from
bin .
• To delete a rule bin, right-click on the bin and select Delete . Any rules in the
bin are moved to the top-level of the Rules pane.
Checking an asset for rules
You can check an asset to see if any rules have been applied to it, and you can release
the asset from complying with a rule.
1. In the Asset List pane, right-click on the asset and select Properties .
The Advanced Asset Properties dialog box displays.
2. Select the Rules tab. Any rules applied to the asset are displayed.
3. To remove the rule from the asset, highlight the rule and click the Reset Rule button.
The rule is no longer displayed.
4. Click the Close button.
Transferring scheduled assets
Prerequisites:
• A file system repository must have been added to the Dyno PA client.
• Because the time and date of the record are determined by the K2 system, while
the time and date in Transfer Scheduler are determined by the PC running the
platform service, these two machines must be in sync.
• The K2 system that serves as the source of the transfer must be set up so that a
record will be in progress at the time the transfer starts.
• The channel must not be in continuous record.
The Scheduled Transfer feature lets you set up transfers ahead of time through K2
Dyno PA. Only Quicktime export is supported.
1. Click the Scheduler tab.
The Transfer Scheduler pane displays.
13 June 2011 Dyno Production Assistant User Manual 53
Transferring Assets with K2 Dyno PA