Grass Valley K2 Dyno PA v.2.0 - Manual (Page 24)

Adding a SAN server
Prerequisites:
• You must be logged in as an administrator on the Dyno PA application to add a
server.
• You must have an administrator-level username and password on the K2 system
that you are going to add as a server. Grass Valley recommends that all the machines
in the K2 Dyno PA system, including the Dyno PA client, have the same
administrator account (username and password).
• The K2 system must have the requirements described in K2 Dyno PA Prerequisites
in the K2 Dyno Production Assistant Configuration Manual.
• The K2 system must have a hosts table set up as described in the K2 System Guide.
• If using the Browse feature, the K2 Summit system must be configured as described
in Configuring the K2 Summit system for K2 Dyno PA in the K2 Dyno Production
Assistant Configuration Manual
To add a SAN server, follow these steps:
1. In the Navigation pane, right-click and select New Server .
2. Choose SAN System .
The Add/Edit SAN System dialog box displays.
3. To have Dyno PA populate the text fields, click the Discovered Devices button
and select a K2 system from the drop-down list. Alternately, you can add the
information:
• Name: Enter the name of the server.
• Description: If desired, you can enter a description of the server.
• SAN Server Host: Enter the host name of the SAN server, for example
K2SummitSAN2
• FTP Host: Enter the host name of the FTP server, for example K2FTP1. If the
FTP server is the same as the SAN server host, leave blank.
• Username: Enter an administrator-level username for the server.
• Password: Enter the matching administrator-level password for this server.
4. To add a SAN client, follow these steps:
• Type: Server (Currently, there is no other option)
• Sub Type: From the drop-down list, select the server you want to add from the
list of available servers. A server can be a K2 Summit Production Client, K2
Solo Media Server, or K2 Media Client.
• Name: Enter the name of the server.
• Description: If desired, you can enter a description of the server.
• Host: Enter the host name of the server, for example Summit2.
• Username: Enter an administrator-level username for the SAN client.
• Password: Enter the matching administrator-level password for this SAN client.
24 Dyno Production Assistant User Manual 13 June 2011
Starting Dyno PA