Grass Valley TR6442i - Manual (Page 46)

42
CommLink TR6442i
User Guide
Fig. A-6: Removing Fiber Cable (left) and the front panel (right)
5 Begin the process of removing the front panel by removing the two screws indicated.
Retain the screws for later re-use. Do not slide off the front panel.
6 Carefully slide the front panel straight out from the unit so as to not bend the
connector pins. This is a multi-pin connector and can be damaged if not handled
carefully.
Fig. A-7: Exposing the multi-pin connector
7 At the bottom rear of the unit, remove two screws that hold the back panel in place.
8 Remove the four screws from the back panel. These screws hold the connector board to
the panel. Do not attempt to remove the panel.
Multi-pin connector