Grass Valley TR6442i - Manual (Page 33)

29
CommLink TR6442i
User Guide
CommLink TR6442i Fiber Optic Intercom Link Switch Configuration
The following decision tree traces the setting of the CommLink TR6442i Fiber Optic
Intercom Link configuration switches.
• Set the System mode - Clear-Com (CC) or RTS
• Decide if you are operating in 2W or 4W
• If in 2W set your power to External (EXT) or Internal (INT) - this decides between using
the power from the intercom system or Belt Packs (EXT) or providing internal power
from the CommLink TR6442i Fiber Optic Intercom Link with the 12 Volt power supply
(INT)
• If in 4W set the switch depending on whether you have an Intercom Matrix Station
(STA) or Matrix (MTX) attached to the CommLink TR6442i Fiber Optic Intercom Link
Fig. 3-7: Configuration Switch Decision Tree