Grass Valley 8949MDA-CFR v.1.1.X - Manual (Page 26)

26 8949MDA-CFR/-SFR—Instruction Manual
Remote Configuration
In general, graphics and text colors used indicate the following:
• Green = Pass – signal or reference present, no problems detected.
• Red = Fault – fault condition.
• Yellow = Warning – signal is absent, has errors, or is mis-configured.
• Gray = Not monitored.
• White = Not present.
Note The physical appearance of the graphics on the web pages shown in this
manual represent the use of a particular platform, browser and version of
8900NET module software. They are provided for reference only. Web pages
will differ depending on the type of platform and browser you are using and
the version of the 8900NET software installed in your system. This manual
reflects 8900NET module running version 4.2.0 software.
For information on status and fault monitoring and reporting shown on the
module Status page, refer to
Status Web Page on page 28 .
Note Click on the Refresh button to update the web page after any changes.
Figure 10. Frame Status Web Page
8434_03
r1
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).
Refresh button for manual
update of page