Grass Valley 8949MDA-CFR v.1.1.X - Manual (Page 18)

18 8949MDA-CFR/-SFR—Instruction Manual
Installation
To extract the fiber optic submodule follow the steps:
Note The fiber cable and the fiber optic submodule must be extracted before the
front and the rear modules.
1. Remove the fiber cable first.
2. Unlock the module by flipping the handle to the left.
3. Remove the fiber optic submodule by using its handle.
Fiber Optic Cleaning Requirement
Before making any fiber optic cable mating connections and after every
de-mating cycle, use an industry standard fiber optic cleaning kit,
including oil-free compressed air, to clean the fiber connectors and the con-
nectorized fiber end faces. This helps ensure optimum performance of the
fiber optic interface. Industry standard fiber optic cleaning kits can be pur-
chased on the web and in electronics stores.