Grass Valley 8900NET v.4.0.0 - Manual (Page 44)

44 8900NET Instruction Manual
Using the 8900NET GUI
8900NET Module Configuration Web Page
The 8900NET Configuration web page ( Figure 23 ) provides the following:
• A reboot button,
• SNMP Agent installation,
• An Asset Tag identifier field, and
• A Frame Health Reports link to the Frame Alarm Reporting web page.
Reboot Module
You may reboot the 8900NET module by selecting the reboot button at the
top of the page. A reboot can also be done on the Network web page.
Install SNMP Agent
To use an SNMP Manager, an SNMP Agent software must be installed on
the 8900NET module. The Configuration web page shown in
Figure 23 is
displayed if the agent software has not already been installed.
To install an SNMP Agent, refer to Install SNMP Agent on page 45 . When
the SNMP Agent has been installed, an SNMP Trap Reports link will be
present on the Configuration web page ().
Asset Tag Assignment
The 8900NET module can be assigned as asset tag identifier by entering
numbers or text in the Asset Tag field. This information will appear on the
8900NET Status web page and in the module inventory when using the
NetConfig Network Configuration application.
Figure 23. 8900NET Module Configuration Web Page (No SNMP Installed)
Use
this
link