Grass Valley 8900NET v.4.0.0 - Manual (Page 11)

8900NET Instruction Manual 11
Installation
Cabling
This section describes physical connections, the connectors and cables,
used for network communications. Setup procedures for each type of con-
nection are described in
Establishing Frame Network Identity on page 25 .
An example of control and monitoring connectors on the frame rear are
illustrated in
Figure 5 for the Gecko 8900 frame and Figure 6 for the
Gecko Flex frame.
Note There are several versions of frames in the Gecko and Gecko Flex 8900
Series. Refer to the manual that came with your frame if the information is
not covered here.
Figure 5. 8900NET Input/Output Connectors on 8900TFN -V/-A Frame
Figure 6. 8900NET Input/Output Connectors on 8900FFN Frame
J1 J2
RS232
ETHERNET
Frame Alarm
(Video Frame – J102 pins 8 and 9)
(Audio Frame – J7 pins 8 and 9)
Network configuration storage
Frame ID
(Frame MAC address storage)
0612_31r1
J1 J2
RS232
ETHERNET J103
J102
Frame Alarm - J102 pins 8 and 9
0612_32