Grass Valley 7600REF User Manual
Page 79
7600 SD/HD/MHD-REF — Instruction Manual
79
Specifications
General
Width
19 in. rack mounting
Height
44 mm (1.73 in.) 1 Rack Unit
Depth
433 mm (17 in.) excluding connectors
Weight
4kg (8.82 lbs) no option modules
5kg (11 lbs) maximum with option modules
Operating temperature range
0 to 50 degrees C
Storage temperature range
-25 to 70 degrees C
Operating humidity
95% RH non-condensing
Power
AC Mains input x 2
90-264 VAC, 45-63Hz, 440Hz auto select
Power consumption
60VA (depending on number of modules installed)
Internal fuse
3.15A
Miscellaneous
Setup data retention when unit not
powered
> 1000 hours. Unit must have been powered for > 24 hours prior to
this.
Serial communication type
RS422/232 (software configured)
Power fail indication
Relay contact, closed under normal operation, open for any failure
state.
Fan fail indication
Relay contact, closed under normal operation, open for any failure
state.
Remote inputs
Two grounding inputs provided on Sub-D connector. See
for details.
Remote outputs
Two outputs provided on Sub-D connector See
for further details. Open collector outputs rated at
45V/500mA maximum.
Ethernet
RJ-45 interface. Software configured for DHCP or static IP address.
1
When the unit is locked to a genlock feed, the frequency stability of the AES signal is dependent on the quality of that feed.
2
Assumes 15625hz (15734.268Hz NTSC) line frequency and subcarrier varied about nominal subcarrier frequency.
Table 6. 7600REF Specifications
Parameter
Value