Grass Valley 7600REF - Manual (Page 28)

28 7600 SD/HD/MHD-REF — Instruction Manual
Operation
• OPTIONS function button to access optional menus (options included
depend on model type, see 7600REF Models on page 18 ).
• LOCK MODE function button to set up genlock modes
• SETUP function button for miscellaneous configuration options
• STATUS button for accessing diagnostic and status information
Basic Operation
There are a number of basic concepts that once understood will simplify the
use of the unit as described below:
• Valid button pushes are indicated by a lamp lit inside a button. In most
cases, buttons without a lamp will not be prohibited, allowing rapid
changes between functions grouped on each button.
• Invalid button pushes will result in an informative message on the
LCD.
Selecting a Function
To change any parameter, the appropriate function button must first be
pushed. Once a function button is pushed, that button will remain illumi-
nated and the others will turn off to provide a reminder of which function
is active.
Pushing a function button that has sub-functions under it will show the
name of the function and the first menu choice. For example, pushing the
SDI function button will bring you to the top of the SDI menu, SDI: Select
Channels . Use either the ADJUST knob or the left or right arrow buttons to
select the choices under this menu: SDI 1 , SDI 2 , or SDI 3 .
The selected choice will be surrounded by brackets < > indicating your
choice. Once you reach the desired choice, press the
OK button to enter that
menu. Depending on the sub-function chosen, either a further set of
sub-functions or the current value of the function is displayed. Where
appropriate, the currently selected option is indicated by asterisks, such as
* On * or * 1080p/23.98 * for example.