Setup menu, Status menu, Options menu – Grass Valley 7600REF User Manual
Page 32
32
7600 SD/HD/MHD-REF — Instruction Manual
Operation
Setup Menu
The system Setup menu provides control of the basic configuration of the
7600REF and will be used primarily during the installation phase. Refer to
System setup includes:
•
Configuration of the LTC function (7600 MDH-REF model)
•
Configuration of the Clock Output
•
Comprehensive control of General Purpose Inputs and Outputs,
including:
•
the input signal response mode
•
the action resulting from a GPI trigger
•
the event causing a GPO state change
•
Check and control of the internal memory
•
Setup of the real-time clock (RTC)
•
Configuration of the Network Time Protocol (NTP) (7600 MHD-REF)
•
Functions under the COMMS menu, including:
•
configuration of the Ethernet port
•
configuration of the Serial port
•
Functions under the DISPLAY menu, including:
•
enable and control timing of the menu timeout
•
set the display contrast
•
Configure the 7600REF as Slave, allowing settings to be received from
a Master
Status Menu
The Status menu provides, for information only, the current version of the
software, hardware and firmware of the 7600REF. These three values will
be required when speaking to Technical Support.
In addition, a series of status error messages may be enabled for display on
the LCD screen. The final option on this menu displays a summary of the
current configuration status. See
for details.
Options Menu
) lists the type of module fitted in each of the
three option slots. Options installed depend on the model type. If no option
module is installed, the text OPTION will be displayed. The text TLS refers
to the Tri-Level Sync option module.