Grass Valley 7600REF - Manual (Page 67)

7600 SD/HD/MHD-REF — Instruction Manual 67
Operation
Many of the menus are the same as those in the previous LTC section. The
additional ATC menu is shown in
Figure 37 .
This menu allows selection of the following:
• ATC Duplicate – this flag indicates where the ATC data to be re-encoded
as a VITC signal appears on 1 or 2 lines in each field.
• ATC Line – sets the line number where the ATC data to be re-encoded as
a VITC signal will appear.
Figure 37. SDI ATC Menu