Preparing a tftp server – Grass Valley 7600REF User Manual
Page 71
7600 SD/HD/MHD-REF — Instruction Manual
71
Using a TFTP Server
Preparing a TFTP Server
Application of the supplied file requires the use of a TFTP server.
7.
Install Solarwinds on a PC which will be accessible by the 7600REF. See
the discussion above on
Local Area Networks on page 70
.
8.
After installation, from the Windows Start menu, launch Solarwinds
TFTP software and select Configure from the File menu.
9.
Select the Security tab (
) and ensure that the Transmit and
Receive files option is selected.
Figure 38. TFTP Server Configuration
10.
Using Windows Explorer, copy the supplied files into the TFTP root
folder normally installed at C:\TFTP-root.
11.
Note the IP Address of the TFTP server. On the PC, select Run from the
Windows Start menu. Type
cmd
, then press
OK
. A command prompt will
open. Type
ipconfig
and press
Enter
. From the text which returns, locate
the IP address. Refer to the example in
.
Figure 39. TFTP Server Configuration