Grass Valley 2000NET v3.2.2 - Manual (Page 51)

2000NET Instruction Manual 51
Using the 2000NET GUI
c. Click on the module’s link and then click on Software Update .
The module’s Software Update page will appear ( Figure 37 ). This
form is the same for all 2000 modules that support network soft-
ware update.
Figure 37. Network Module Software Update Web Page
d. In the FTP Server Address field, enter the IP Address of the PC that
has the FTPD installed and running.
e. You can enter the Host Name of the PC that has the FTPD running
into the FTP Server Name field. This is an optional step and can be
omitted.
f. Click on Apply to set the FTP Address.
The web page will refresh and the new FTP address should be dis-
played as the Current Settings.
g. In the File Path field, enter the FTP file path of the software update
file.
The FTP file paths use forward slashes. The directory name “/mod-
ular” is not needed in the path name.
Use
this
link