Grass Valley 2010RDA - Manual (Page 9)

2010/2011RDA Instruction Manual 3
Installation
2. Insert the passive rear module into the vacant rear slot of the frame as
illustrated in
Figure 2 (2000PRM-D shown here).
Figure 2. Installing Passive Rear Module
3. Verify that the module connector seats properly against the midplane.
4. Using a crossblade screwdriver, tighten the two screw locks to secure
the module in the frame.
5. Locate the corresponding front slot in the frame. The 3 RU frame front
view is illustrated in
Figure 3 .
Figure 3. 2000 Series 3 RU Frame, Front Slots
J3 J2 J1 AES AUDIO OUTPUTS (8) AES AUDIO OUTPUTS (8) AES AUDIO INPUTS (4)
2000PRM–D
2000PRM-D Passive Rear Module Shown
Alignment post
and receptacle
Screw lock
(both sides)
8068_05
2000 frame (rear view)
Board edge guides
(both sides)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(1)
Front Media Modules
Slots 1-12
8024 -07