Module configuration displays, Software update display, Input status output mode display – Grass Valley 2010RDA User Manual
Page 18
12
2010/2011RDA Instruction Manual
2010/2011RDA Dual/Quad AES/EBU Reclocking DA
Module Configuration Displays
The 2000 GUI provides the following links and displays for the
2010/2011RDA module (
■
Module Configuration displays showing status and slot configuration
information (location and user assigned names),
■
Input Status Output Mode display, and
■
Software Update display.
The Module Configuration displays operate in the same manner for all
remote controllable 2000 modules. Refer to the 2000NET manual for more
information on these displays. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
Figure 11. 2010/2011RDADisplay Links
Software Update Display
The Software Update display allows you to download new software ver-
sions for the module. Refer to the 2000NET manual and the Grass Valley
Group web site at http://www.grassvalleygroup.com for complete details
and new software versions.
Input Status Output Mode Display
This section discusses the Input Status Output Mode display available to
monitor the 2010/2011RDA module status remotely.