2010/2011rda dual/quad aes/ebu reclocking da, Introduction – Grass Valley 2010RDA User Manual
Page 7
2010/2011RDA Instruction Manual
1
2010/2011RDA Dual/Quad
AES/EBU Reclocking DA
Introduction
This manual covers both the 2010RDA (Dual) and 2011RDA (Quad)
AES/EBU Reclocking DA modules. Both versions of the module share the
same circuit board with additional circuitry added for the quad channels.
The 2010RDA is a Dual AES/EBU Reclocking Distribution Amplifier pro-
viding two independent digital audio streams. The module can be config-
ured for single or dual operation. The following 2010RDA models are
available:
■
2010RDA with 75
Ω
(unbalanced) BNC connector passive rear module
(COAX PRM) provides connections for a single input with 8 outputs or
2 inputs with four outputs each, or
■
2010RDA-110 with 110
Ω
(balanced) D-connector passive rear module
(2000PRM) provides connections for a single input with 16 reclocked
outputs or 2 inputs with 8 reclocked outputs each.
The 2011RDA-110 is a Quad AES/EBU Reclocking Distribution Amplifier
providing four independent digital audio streams. The module can be con-
figured for single, dual or quad operation. The passive rear module has
110
Ω
D-connectors and can provide a single input with 16 reclocked out-
puts, dual inputs with 8 reclocked outputs each, or quad mode with 4
inputs with 4 outputs each.
The 2010RDA, 2010RDA-110, and 2011RDA-110 modules feature:
■
Single, dual, and quad (2011RDA-110 only) modes,
■
75
Ω
unbalanced (2010RDA only) or 110
Ω
balanced input/output I/O,
■
Reclocking at sample rates of 32, 44.1, 48 or 96 kHz, and
■
Remote control and monitoring.