Grass Valley 2010RDA - Manual (Page 10)

4 2010/2011RDA Instruction Manual
2010/2011RDA Dual/Quad AES/EBU Reclocking DA
6. With the component side up, insert the front media module in the
corresponding front slot (see
Figure 4 ).
7. Verify that the module connector seats properly against the midplane
and rear module connector.
8. Press firmly on both ejector tabs to seat the module.
Figure 4. Installing Front Media Module
2010/11RDA
Alignment post and receptacle
8068-10
2000 Frame (front view)
Board edge
guides
Board edge
guides