Grass Valley 2010RDA - Manual (Page 17)

2010/2011RDA Instruction Manual 11
Remote Configuration and Monitoring
Remote Configuration and Monitoring
Monitoring of the 2010/2011RDA can be performed remotely using the
2000NET interface (see
Figure 10 ). This section describes the GUI access to
the module configuration functions. Refer to the 2000NET Network Inter-
face Module Instruction Manual for information on setting up and oper-
ating the 2000 frame network.
Note The physical appearance of the menu displays shown in this manual repre-
sent the use of a particular platform, browser and version of 2000NET
module software. They are provided for reference only. Displays will differ
depending on the type of platform and browser you are using and the version
of the 2000NET software installed in your system.
The 2000 modules can be addressed by clicking on a specific module icon
in the frame status display or on a module name or slot number in the link
list on the left.
Figure 10. 2000NET GUI
8026-08
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).