H3C Technologies H3C Intelligent Management Center - Manual (Page 33)

29
Figure 37 Batch Operate
• Configure Inform Interval: Allows you to configure the interval for accessing iMC BIMS for multiple
devices in batches.
• Configure Polling Interval: Allows you to configure the interval for the system to poll the specified
devices in batches. iMC BIMS reads the configuration information on the specified CPE devices at
this interval.
• Configure Access Parameters: Allows you to configure the username and password used by iMC
BIMS to access specified CPEs in batches.
• Set Auto Restore Strategy: Allows you to batch configure multiple devices to automatically restore
device configuration or software to the baseline version.
To perform batch configurations:
On the Batch Operate page, click Configure Inform Interval to enter the Periodic Inform Interval page.
Figure 38 Periodic Inform Interval
Click Select Device and select one or more devices on the popup device list. On the Periodic Inform
Interval page, type the inform interval, and click Apply.
On the Batch Operate page, click the Set Auto Restore Strategy link to enter the page for setting the auto
restore strategy.