Setting an smsc – H3C Technologies H3C Intelligent Management Center User Manual

Page 28

Text mode
Original mode

Figure 30 Add Mail Notification

Type the rule name and destination mail address, select the concerned alarm levels, concerned devices,

and concerned alarm levels, set the time range for each day in the format of 00:00-24:00, and click OK.

Setting an SMSC

This function helps you configure the short message service center (SMSC). Before setting message
notification, set an SMSC. SMSC settings include the virtual port that connects the message sending

device to the SMSC server, baud rate, country code, and SMSC number.
Click the System tab, and then click the SMSC Settings link to enter the SMSC Settings page.