H3C Technologies H3C Intelligent Management Center - Manual (Page 19)

15
Auto deploying device configuration
This function allows you to create an automatic device configuration deployment task, which deploys the
specified configuration file or configuration segment to the device accessing the network for the first time.
You can perform auto deploy configuration by device or by device class.
By device
Click the Configuration tab and select Deployment Guide in the navigation tree. Click By Device in the
Auto Deploy Configuration field to enter the Auto Deploy Configuration – Select Device page.
Figure 19 Auto Deploy Configuration – Select Device
Select the folder and file name of the configuration template, the file type to be deployed, whether to
update the baseline configuration or not, and one or multiple target devices. Click Next to enter the Auto
Deploy Configuration – Set Task Attributes page.
NOTE:
On the Auto Deploy Configuration – Select Device page, if you select a configuration template that
contains parameters to be configured and click Next, you enter the Auto Deploy Configuration –
Configure Parameters page. When you complete setting the parameters, click Next to enter the Auto
Deploy Configuration – Set Task Attributes page.