H3C Technologies H3C Intelligent Management Center - Manual (Page 81)

72
5. Enter intranet IP addresses in the Intranet Monitor Information area, and click Add.
The intranet network segments are displayed in the Intranet Information area.
6. Click Deploy.
Adding a user behavior audit task
1. In the Guide to Quick Traffic Analysis And Audit Configuration area, click User Behavior Audit
Management.
The User Behavior Audit Management page appears.
2. Click Add.
The Select Audit Type page appears, as shown in
Figure 12 .
Figure 12 Selecting an audit type
3. Select an audit type, and click Next.
This example uses General Audit. The Add Custom General Audit page appears, as shown
in
Figure 13 .