H3C Technologies H3C Intelligent Management Center - Manual (Page 41)

32
2. In the filter strategy list, click a filter strategy name.
The Filter Strategy Details page appears.
Basic Information area
{
Name—Name of the filter strategy.
{
Description—Description for the filter strategy.
{
Default Policy—Default filter policy for the filter strategy: Receive or Discard.
Filter Condition List area
{
Priority—Priority number of the filter condition. The smaller the number is, the higher the
priority is.
{
Policy—Filter policy for the filter condition: Receive or Discard.
{
Source Host—Source IP address of the flow record.
{
Source Port—Source port number of the flow record.
{
Destination Host—Destination IP address of the flow record.
{
Destination Port—Destination port number of the flow record.
{
Protocol—Protocol type of the flow record.
3. Click Back to return to the Filter Strategy Management page.
Adding a filter strategy
1. Access the Filter Strategy Management page.
2. In the filter strategy list, click Add.
The Add Filter Strategy page appears.
3. In the Basic Information area, perform the following tasks:
a. In the Name field, enter a unique filter strategy name.
b. In the Description field, enter a description for the filter strategy.
c. From the Default Policy list, select Receive or Discard.
4. In the Filter Condition List area, click Add. On the Filter Condition Configuration dialog box that
appears, perform the following tasks:
a. From the Policy list, select Receive or Discard.
b. In the Source Host field, enter the source IP address.
You can enter an IP address or an IP address segment in dotted decimal notation or CIDR
notation.
An example of a valid IP address entry:
10.153.89.10
An example of a valid network/subnet mask in dotted decimal notation:
10.153.89.0/255.255.255.0
A valid network/subnet mask entry in CIDR notation:
10.153.89.0/24
An example of a valid IPv6 address entry:
a001:410:0:1::1
A valid IPv6 address and subnet mask in CIDR notation:
a001:410:0:1::1/64