H3C Technologies H3C Intelligent Management Center - Manual (Page 24)

15
2. In the device list, click the Modify icon for the UBA data source device you want to modify.
The Modify Device page appears.
3. Modify device parameters as needed.
You cannot modify the Device IP and Name field. For more information about modifying UBA
data source device parameters, see "
Adding a UBA data source device ."
4. Click OK.
Deleting a UBA data source device
Deleting a device from UBA does not delete the data received from the device prior to the deletion.
To delete a UBA data source device:
1. Access the Device Management page.
2. In the device list, click the Delete icon for the UBA data source device entry you want to
delete.
A confirmation dialog box appears.
3. Click OK.
NOTE:
Once a UBA data source device has been deleted, all user behavior audit tasks associated with the
device will be terminated.
Managing probes
Viewing the probe list
1. Access the Settings page.
2. Click the Probe Management link or icon
The Probe Management page appears and displays all probes that have been added to UBA.
Probe List contents
{
Name—Name of the probe. You can click the probe name to view details for the probe.
{
IP—IP address of the probe.
{
Description—Description for the probe.
{
Enable Layer 7 Application Identification—Indicates whether Layer 7 application identification
is enabled for the probe.
{
Modify—Allows you to click the Modify icon to modify the probe.
{
Delete—Allows you to click the Delete icon to delete the probe.
Viewing probe details
1. Access the Probe Management page.
2. In the probe list, click a probe name.
The Probe Details page for the device appears and displays all parameters that were configured
when you add a probe.
Probe Details contents
{
Name—Name of the probe.