Batch importing applications, Modifying an application – H3C Technologies H3C Intelligent Management Center User Manual
Page 37
28
b.
Select Yes from the Enable list if you want to enable the application. Select No if you do not
want to disable the application.
9.
Click OK to create the application.
Batch importing applications
UBA allows you to import custom applications from a CSV file in batches. The CSV file cannot be larger
than 2MB and must be encoded in ANSI. Each line of the file defines one application, including the
application name, protocol, port number, and application description.
To import custom applications to UBA in batches:
1.
Access the Application Management page.
2.
In the application list, click Import.
The Import Application page appears.
3.
Click Browse.
The window for selecting an application definition file appears.
4.
Select the application definition file to be imported, and click Open.
IMC will automatically populate Application Definition File field with the file's path and name.
5.
Click Upload File.
UBA starts to resolve the file contents. The Import Application page will be refreshed to display
the resolution result in the application List.
Imported Application List contents
{
Line NO.—Number of the line that holds the application.
{
Application—Name of the application, which is defined by the first column of the file.
{
Protocol—Protocol used by the application, which is defined by the second column of the file.
{
Port—Port number used by the application, which is defined by the third column of the file.
{
Description—Description for the application, which defined by the fourth column of the file.
{
Status—Status of the application. After UBA finishes the resolution, the correct status of an
application is To be imported. If prompted wrong status, check the file format.
6.
Click Import.
If the import succeeds, the Status field on the Application List displays Successful. If the import is
failed, the Status field shows the reason for the failure.
7.
Click Back to return to the Application Management page.
Modifying an application
1.
Access the Application Management page.
2.
In the application list, click the Modify icon
for the application you want to modify.
The Modify Application page appears.
3.
Modify application parameter as needed.
For a predefined application, you cannot modify the Protocol, Application Type, and Port fields.
For a custom application, you cannot modify the Protocol and Application Type fields. For more
information about modifying application parameters, see "
."