H3C Technologies H3C Intelligent Management Center - Manual (Page 20)

11
Managing UBA data sources
Managing UBA data source devices
Viewing UBA data source device list
1. Access the Settings page.
2. In the Settings area, click the Device Management link or icon .
The Device Management page appears and displays all devices that have been added to UBA.
Device List contents
{
Name—Name of the device. By default, UBA autopopulates this field with the device label
when you add a device by selecting the device from the IMC Platform. You can click the device
name to view device details.
{
Device IP—IP address of the device.
{
Description—Description for the device.
{
Device Resource Info—This field is available for only devices that you add to UBA by selecting
devices from the IMC Platform. You can click the Device Resource Info icon
to view the
device resource information.
{
Modify—Allows you to click the Modify icon to modify the device information.
{
Delete—Allows you to click the Delete icon to delete the device from UBA.
Viewing UBA data source device details
1. Access the Device Management page.
2. In the device list, click a device name.
The Device Details page appears and displays all parameters that were configured when you
add a UBA data source device.
Device Details contents
{
Device IP—IP address of the device.
{
Name—Name of the device.
{
Description—Description for the device.
{
SNMP Community—SNMP community string for the device in cipher text.
{
SNMP Port—SNMP listening port number for the device. The default value is 161.
{
Log Source IP—IP address of the log source for the device. This field is available only if you
configured it when you added a device.
{
NetStream Statistics Identifier—Indicates whether the NetStream statistics identifier is valid for
the device.
{
NetStream New Feature—Indicates whether the NetStream flow sampling feature is enabled
for the device.
{
NetStream Sampling Ratio—NetStream sampling rate configured for the device. The value of
1 indicates that the sampling rate is 1:1, and the value of 100 indicates that the sampling rate
is 1:100. This field is available only if you configured it when you added a device.
3. Click Back to return to the Device Management page.