H3C Technologies H3C Intelligent Management Center - Manual (Page 93)

86
DBMan starts to restore the databases.
If backup files are saved on the database server:
a. Click Remotely Restore.
The Configure Remote Restoration dialog box appears.
Figure 71 Configure Remote Restoration dialog box
b. Click Configure to select the database files to be restored on the database server and click OK.
The Confirm dialog box appears.
Figure 72 Confirmation dialog box
c. Click Yes.
DBMan starts to restore the databases.
After the local or remote restoration is complete, the system displays a restoration success
message.
5. Click OK.
IMC will be automatically started.
NOTE:
During the restoration process, DBMan shuts down and restarts IMC and the database service.
Automatic backup
You can configure DBMan to periodically back up the IMC data files, and to upload the backup data
files to the FTP server or the master of the failover system.
To configure automatic backup: